Name: TSDS Series - Single Shot Timer
Brand: Littelfuse Inc.

TSDS Series - Single Shot Timer

Series: TSDS

Questions? Contact Littelfuse Support

Disclaimer Notice

Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.

The TSD Series is designed for more demanding commercial and industrial applications where small size and accurate performance are required. The factory calibration for fixed time delays is within 1% of the target time delay. The repeat accuracy, under stable conditions, is 0.5% of the time delay. The TSD Series is rated to operate over an extended temperature range. Time delays of 0.1 seconds to 1000 minutes are available. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry. This product is suitable for many applications, including dispensing, welding, and exposure timing.

Operation (Single Shot)
Input voltage must be applied before and during timing. Upon momentary or maintained closure of the initiate switch, the output energizes for a measured interval of time. At the end of the delay, the output de-energizes. Opening or reclosing the initiate switch during timing has no affect on the time delay. The output will not energize if the initiate switch is closed when input voltage is applied.
Reset: Reset occurs when the time delay is complete and the initiate switch is opened. Loss of input voltage resets the time delay and output.

Access specifications, certifications, check availability and order parts below

Catalog #	Input Voltage (V)	Output Form	Storage Temperature (F/C)	Time Delay Range	Dimensions	Stock	Samples

TSDS2110S	24 V ac	NO - closed during timing	-40° to 85°C (-40° to 185°F)	10 s fixed	2 H x 2 W in. (50.8 x 50.8 mm)	Check	Order
TSDS320N	24 V dc	NO - closed during timing	-40° to 85°C (-40° to 185°F)	0.1 - 10 s externally adjustable	2 H x 2 W in. (50.8 x 50.8 mm)	Check	Order
TSDS321P	24 V dc	NO - closed during timing	-40° to 85°C (-40° to 185°F)	1 - 100 s externally adjustable	2 H x 2 W in. (50.8 x 50.8 mm)	Check	Order
TSDS421	120 V ac	NO - closed during timing	-40° to 85°C (-40° to 185°F)	1 - 100 s externally adjustable	2 H x 2 W in. (50.8 x 50.8 mm)	Check	Order