Name: TDIL Series - Dedicated - Interval
Brand: Littelfuse Inc.

TDIL Series - Dedicated - Interval

Series: TDIL

Questions? Contact Littelfuse Support

Disclaimer Notice

Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.

The KSDB is designed for general purpose commercial and industrial applications where a small, cost effective, reliable solid-state timer is required. The factory calibration for fixed time delays is within 5% of the target time delay. The repeat accuracy, under stable conditions, is 0.5% of the selected time delay. This series is designed for popular AC and DC voltages. Time delays of 0.1 seconds to 1000 minutes are available in 6 ranges. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.

Operation (Delay-on-Break)
Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output energizes. The time delay begins when the initiate switch is opened. The output remains energized during timing. At the end of the time delay, the output de-energizes. The output energizes if the initiate switch is closed when input voltage is applied.
Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.

Access specifications, certifications, check availability and order parts below

Catalog #	Input Voltage (V)	Output Form	Storage Temperature (F/C)	Time Delay Range	Dimensions	Stock	Samples

TDIL120AL	120 V ac	DPDT	-30° to 85°C (-22° to 185°F)	0.1 - 102.3 s in 0.1 s increments	3.2 H x 2.4 W in. (81.3 x 60.7 mm)	Check	Order
TDIL24DL	24 V dc	DPDT	-30° to 85°C (-22° to 185°F)	0.1 - 102.3 s in 0.1 s increments	3.2 H x 2.4 W in. (81.3 x 60.7 mm)	Check	Order