SCR9L Series - Obstruction Lamp Alarm Relay

External overview image
Roll Over to Zoom
The SCR9L is a universal lamp alarm relay designed to sense the failure of flashing or steady LED beacon lamps or obstruction lamps. The SCR9L energizes when one or more lamps fail. It will monitor the operation of one to eight beacon or obstruction lamps. All monitored lamps must be the same wattage and voltage. When connected to a site monitoring system, it provides the remote lamp monitoring protection required by the FAA-AC No: 150/5345-43E.

When a lamp fails, the SCR9L senses a decrease in current flow. After a 10s trip delay, the onboard LED glows and the two alarm outputs energize. The outputs and the LED are reset when the failed lamps are replaced and the unit is recalibrated. The SCR9L will sense an open flasher, it will not sense a continuously ON flasher (see FB Series). Removing input voltage de-energizes the output and the LED‘s. It does not change the calibration.

Access specifications, certifications, check availability and order parts below

Catalog #Input
Voltage (V)
Trip Delay TypeOutput Load Rating (VA)DimensionsStock
SCR9L120 - 230 V acLine Voltage Output: SPNO; Isolated Alarm Output: SPDT≅10 fixedLine Voltage Output (SPNO): 5 A @ 240 Vac or 30 Vdc resistive - 1/4 hp @ 125 Vac - 1/2 hp @ 250 Vac; Isolated Alarm Output (SPDT): 10 A @ 240 Vac or 30 Vdc resistive - 1/4 hp @ 125 Vac - 1/2 hp @ 250 Vac3 H x 2 W in. (76.7 x 51.3 mm)Check
To request product environmental information, please complete the Product Environmental Information Request Form.