CPC5001 - Dual Digital Isolators Series

Series: Dual Digital Isolators
Availability: Obsolete

Obsolete
Questions? Contact Littelfuse Support
External overview image
Roll Over to Zoom
   
Disclaimer Notice

Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.

The CPC5001 is a non-inverting digital optical isolator with buffered-logic inputs and open-drain outputs. Channel 1 propagates a signal from SideA to SideB, while Channel 2 sends a signal from SideB to SideA. It provides galvanic isolation across voltage differences up to 3750Vrms . When the two sides are powered by different supply voltages, it also functions as a logic level translator for levels as low as 2.7V or as high as 5.5V. It functionally replaces two logic buffers and two single-channel optoisolators. Internal bandgap references regulate the LED drive currents to 3mA to reduce peak power requirements.

Unlike transformer or capacitive isolators, optical isolation passes DC signals, and does not need to be clocked periodically to refresh state. Buffered signals will always return to their proper value after a transient interruption at either side.

Features:

  • Isolates One Signal in Each Direction
  • Operates From 2.7V to 5.5V
  • Buffered Inputs - No External LED Drive Required
  • Voltage Level Translation
  • Hysteresis at Inputs for Noise Rejection
  • Slew-Limited Drivers Reduce EMI
  • Power-Down to Hi-Z Does Not Load Outputs
  • 5Mbd Data Rate

Applications:

  • Isolated Signal Monitoring and Control
  • Power-Over-Ethernet
  • Power Supply High-Side Interface
  • Logic Level Translation
  • Microprocessor System Interface
  • Inter-Integrated Circuit (I2C) Interface
  • Serial Peripheral Interface (SPI)
  • Full Duplex Communication
  • Isolated Line Receiver
  • Isolated Data Acquisition Systems

Property (Mouseover for details) Value
Supply Voltage Range (V) 2.7 to 5.5
Transmission Speed (Mbaud) 5
Isolation Voltage (VRMS) 3750
Package Type 8-pin: DIP, SMT
Sample Request No
Partner ECAD Models CPC5001

To request product environmental information, please complete the Product Environmental Information Request Form.