SE-CS30 Series - Current Sensor

External overview image
Roll Over to Zoom

Current Sensor
Current sensor used to detect ground-fault current.

Access specifications, certifications, check availability and order parts below

Catalog #CT secondary current AmpsWeight (lbs/g)Inner Diameter inInside Diameter mmCompare
SE-CS30-260.050 Kg126
SE-CS30-40.050 Kg3.795
SE-CS30-50.050 Kg5.1130
SE-CS30-700.050 Kg2.870
SE-CS30-80.050 Kg8203
Part # Part Description RoHS Pb-free RoHS (2015/ 863/EU) Certificate REACH (SVHC’s) Declaration Halogen Free REACH (SVHC’s)
SE-CS30-4 XFMR CURRENT 600:1 95mm ID W/FLUX CON RoHS No 03/05/2018 PbFree No 03/05/2018 CoC_REACh181_SE-CS30-4_03-19-2018 REACH197_Declaration_with_Pb_SE-CS30-4_02-20-2019 Yes
SE-CS30-5 CURRENT SENSOR 130mm RoHS No 02/19/2019 PbFree No 02/19/2019 CoC_RoHS9_SE-CS30-5_2-20-2019 REACH197_Declaration_with_Pb_SE-CS30-5_02-20-2019
SE-CS30-70 XFMR CURRENT 600:1 70mm ID RoHS No 03/05/2018 PbFree No 03/05/2018 CoC_REACh181_SE-CS30-70_04-18-2018 Yes
If the product environmental information that you are looking for does not appear in this tab,
please complete the Product Environmental Information Request Form.

pdf icon SE-CS30 26 Drawing

CS30-4 3D Model

CS30-5 3D Model

CS30-8 3D Model

CS30-26 3D Model

CS30-70 3D Model

dwg Littelfuse Protection Relays SE CS30 26 CAD Drawing

dwg CS30-5 CAD Drawing

dwg CS30-70 CAD Drawing

dwg Littelfuse Protection Relays SE-cs30-26 CAD Drawing

dwg Littelfuse Protection Relays SE-cs30-26 Dimensions

pdf icon TN CT-03 Locating Phase Conductors in a Zero-CT Window

An ideal window-type current transformer responds only to the sum of the currents fl owing through its window...

pdf icon TN CT-04 Hammond CTs

pdf icon TN CT-06 CT Turns Ratio Modification

A window-type current transformer is also referred to as a core-balance or fl ux-balance transformer...

pdf icon TN CT-08 Ground-Fault Current Transformer Location

A ground fault on a grounded system can be detected using a current-sensitive ground-fault monitor...

pdf icon TN CT-09 Sensitive Ground-Fault Protection Using Split-Core CTs

A zero-sequence CT is optimized by using a symmetrical core and windings that are evenly spaced around the core. The symmetry allows the CT to operate in the presence of high load currents...

pdf icon TN CT-10 CT and PT Polarity Testing

Correct operation of MPS and FPS relays depends on accurate polarity. Markings on current transformers (CT) and potential transformers (PT) have been occasionally misapplied from the factory...

pdf icon TN CT-11 FPL Zero-Sequence Sensors with Littelfuse Relays

pdf icon Protection Relays and Controls Catalog - Mandarin

pdf icon SE CS30 Datasheet